Connecting to optional equipment – Toshiba SD-5980SU User Manual
Page 18
18
Connections
*
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to
that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
• This connection is only suitable for Video CDs and Audio CDs.
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on
DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS
encoded sound tracks on DVD video discs or audio CDs.
Manufactured under license from
Dolby Laboratories. “Dolby”, “Pro
Logic”, and the double-D symbol
are trademarks of Dolby
Laboratories.
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
“DTS” and “DTS Digital Out” are
registered trademarks of Digital
Theater Systems, Inc.
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and
is now available to reproduce this realistic effect in the home. You can enjoy motion picture and
live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic
realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a
Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic
decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full
5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.
Connecting to optional equipment
You can enjoy high quality dynamic sounds by connecting the
unit to optional audio equipment.
For connection to your TV, see “Connecting to a TV”
#
16
17
.
To audio input
Audio cable (not supplied)
To AUDIO OUT
Amplifier equipped with
Dolby Surround Pro Logic
75
Ω coaxial cable (not supplied)
To COAXIAL
type digital
audio input
Amplifier equipped with a
Dolby Digital decoder
Amplifier equipped with
a DTS decoder
75
Ω coaxial cable (not supplied)
To COAXIAL
type digital
audio input
• Use DVD video discs encoded via
the Dolby Digital recording system.
• Make sure following setting.
• Use DVD video discs or audio CDs
encoded via the DTS recording
system.
• Make sure following setting.
Optical cable (not supplied)
Optical cable (not supplied)
On-screen display
Select:
Page
“Digital Out”
“PCM” or “Raw”
36
On-screen display
Select:
Page
“Digital Out”
“PCM” or “Raw”
36
• Make sure following setting.
On-screen display
Select:
Page
“Digital Out”
“Raw”
36
Connect either
Connect either
2F60201A [E] P15-19
2/22/05, 10:47 AM
18