Tekkeon MP1200 - Manual (Page 8)

2. Connect the USB connector to a USB power
adapter or to a USB port on a computer.
The battery capacity indicator will turn red
to indicate the myPower for iPhone battery
is being charged. If connected, the iPhone
battery charging status indicator will indicate
charging.
3. Unplug the USB cable when the battery
capacity indicator changes from red to green
as the battery is fully charged.
Note: If you are charging iPhone at the same
time, you must use an iPhone-compliant USB
adapter.
Syncing iPhone
The intelligent design of myPower for iPhone
enables you to sync iPhone while charging it via
a USB port on your computer.
1. Connect the mini USB connector to the mini
USB port on myPower for iPhone.
2. Connect the USB connector to a USB port
on a computer. iPhone will sync with your
computer.
Storing myPower for iPhone
Lithium polymer batteries must be used
consistently for maximum performance.
6 MP1200/MP1250