Tekkeon MP1200 - Manual (Page 7)

2. Snap the tab in place to secure iPhone.
3. Use iPhone as you would normally. The
iPhone battery will not be used while iPhone
is docked in the case.
Removing iPhone from the Case
1. Unsnap the tab.
2. Gently pull iPhone from the case.
Viewing the Battery Capacity
When iPhone is docked into the case, the
Battery Level Indicator on the bottom left side of
myPower for iPhone will indicate the remaining
battery capacity as follows:
Green (65%-100%)
Orange (30%-65%)
Red (1%-30%)
Charging myPower for iPhone
An empty myPower for iPhone will charge in
about 3 hours using an iPhone compliant power
adapter. Both empty batteries can be charged in
about 6 hours.
1. Connect the mini USB connector to the mini
USB port on myPower for iPhone.
USER GUIDE 5