Tekkeon MP1200 - Manual (Page 6)

Using myPower for iPhone
You can use myPower for iPhone to power
your iPhone, or to charge your iPhone while
connected to external power. When powering
iPhone, myPower for iPhone will bypass the
iPhone battery to power a connected iPhone,
thus extending the overall life of the iPhone
battery. The battery will not charge iPhone
unless connected to an external power source.
myPower for iPhone is charged in two ways: by
connecting to a USB power adapter, or to a USB
port on a computer. The included USB cable is
used to charge the device. If you are using an
iPhone-compliant USB power adapter, you also
may charge your iPhone at the same time by
inserting the iPhone in the case while connected
to an external power source.
As a bonus feature, myPower for iPhone
doubles as a dock to sync iPhone to your
computer when connected via the USB cable.
In this case, myPower for iPhone will both sync
and charge iPhone.
Inserting iPhone into the Case
Placing iPhone in the Case
1. Slide iPhone into the case, ensuring that the
iPhone is fully docked onto the 30-pin
connector in the bottom of the case.
4 MP1200/MP1250