Transcend Information MP630 - Manual (Page 11)

Basic Operation
Player Controls
Charging the Battery
Plug the small end of the Mini USB to USB A-Type cable into the Mini USB connector on the MP630 and
plug the large end of the cable into an available USB port on your desktop, or notebook computer. The
MP630
’s internal Li-ion battery will begin charging.
Figure 3. Connecting to a Computer
Power ON
Press and Hold the “PLAY/PAUSE/PWR ON-OFF” button to Power ON the MP630. An
animated logo will appear on the OLED Display. After the startup screen disappears the player will revert
to the default MUSIC Mode screen, you can now begin to use the MP630.
It takes a few seconds to Power ON the unit.
When powering on the unit, if the LOCK icon appears on the OLED Display, this means that the
MP630 ’s “LOCK” switch is on. You must switch off the “LOCK” before you can Power ON
the MP630.
7