TOA Electronics RS-232C User Manual
Page 11
5.3. Preset Memory Recall
Recalls any desired preset memories. 9000Series Amplifier responds with the same data
as that received.
Note:
Settings to be stored in preset memories are referred to as “SCENE” in mixer mode and
“EVENT” in matrix mode.
Preset Memory Recall command cannot be received during power off.
F1H, 02H, 00H,
Note: During single channel operation or BGM/PAGE operation in matrix mode
00H - 07H: Preset Number 1 - 8
Example 1: Recalling Preset Memory 1
F1H, 02H, 00H, 00H
Example 2: Recalling Preset Memory 2
F1H, 02H, 00H, 01H
Following command is used to terminate "EVENT" in Matrix Mode.
F1H, 02H, 01H, (Event #)
9000 series Amplifier ignores this command in Mixer Mode.
It also ignores this command if the "EVENT" is not activated, or the "EVENT" is BGM
Event.
The ROUTE event using the input channel with priority 8 (BGM event) and the BASE
event cannot be terminated by this command.
To terminate the BGM event or the BASE event, it is necessary to setup the BGM END
event to the unit and activate it.
5.4. Channel ON/OFF
This performs ON/OFF setting of the Input or Output channel. 9000Series Amplifier
responds with the same data as that received.
92H, 03H,
Page 11 of 24