Technicolor - Thomson LB030 User Manual

Page 12

RÉFÉRENCES

This menu allows to select the language for the menus as well as the colour of the
screen when there is no video input. It allows also to set an automatic shut-off time.

Display the Main menu by pressing MENU
button.
Select the SETUP option using the ⁄button.
Press the ÿ button to display the SETUP menu.
Use the Ÿ / ⁄ buttons to select each option.

BLUE SCREEN : To have a blue screen when there is no video input or when the RF

signal is very bad.
Using the / ÿ buttons select ON.
Select OFF if you do not want the blue screen.

LANGUAGE : To select the language for the menus.

Using / ÿ buttons, select the desired language.
Default language is english.

SLEEP TIMER : To set an automatic shut-off time. Using / ÿ buttons select 0 >

30 > 60 > 90 > 120 minutes.
Once the time is ended, TV set automatically switch on standby mode .
If you turn the TV on standby mode after setting the sleep timer, setting will be

erased. Set it again.

TELETEXT : Using / ÿ buttons, select the character set that wil be used for

Teletext on this channel.

The following character sets are available: WEST EUROPE, EAST EUROPE,

ARABIC, GREEK, CYRILLIC.

The character set determines how characters are displayed on Teletext screen.

RESET: Return to default settings. Press one of the / ÿ butons to return to default

settings.

Press the EXIT button to exit the SETUP menu.
Note : this menu is removed automatically after a few seconds without using the
remote control.

Note : You can display the remaining time before the automatic shut-off.

To do that, press the sleep button .

To cancel the automatic shut-off, press several times the sleep button to display

SLEEP TIMER - - - .