Basic operation, Out of range, Call waiting – Toshiba FT-8801A User Manual
Page 18: Handset earpiece volume setting, Handset ringer volume setting, Redial, Basics

18
BASIC OPERATION
Basics
OUT OF RANGE
During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move close to the base unit. If you
travel out-of-range, your call terminates.(See page 19 “Interference or
static”).
CALL WAITING
To use this feature, you must subscribe to the Call Waiting Service.
1
When you hear a call-waiting tone during your conversation on the
phone, simply press
.
2
To return to the first caller, press
again.
NOTE:
Pressing
without receiving a Call Waiting signal may disconnect the
current caller.
HANDSET EARPIECE VOLUME SETTING
FLASH
FLASH
FLASH
To adjust the earpiece volume, press
(
or
) during a call.
HANDSET RINGER VOLUME SETTING
To adjust the ringer volume, press
(
or
) during standby
mode.
VOL/RING
VOL/RING
REDIAL
Handset On The Base
1) Pick up the handset and press
.
2) Listen for the dial tone.
3) Press
.
REDIAL
TALK
Handset Off The Base
Press
, then press
.
TALK
REDIAL
FT-8801A.qxd 7/13/1 10:40 AM Page 18