TANDBERG 700 MXP - Manual (Page 234)

TANDBERG 7000 MXP
220
5.1 Interfaces
5.1.1 Video
5 Video Inputs:
ƒ 2 video inputs supporting S-Video through Mini-DIN connectors.
ƒ 2 video inputs supporting composite signals through RCA connectors.
ƒ 1 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) input, analog
or digital.
ƒ (use VNC as a 6th video input).
The standard camera uses one of the S-Video inputs.
Levels:
ƒ Composite: 1 Vpp, 75 ohm
ƒ S-Video
(Y/C):
ƒ Y: 1 Vpp, 75 ohm
ƒ C (PAL): 0.3 Vpp, 75 ohm
ƒ C (NTSC): 0.28 Vpp, 75 ohm
The system will automatically adapt to a PAL or NTSC input.
VGA formats supported on 'DVI-I in:
SVGA (800x600) 60Hz, 72Hz, 75Hz, 85Hz
XGA (1024x768) 60 Hz, 70Hz, 75Hz
SXGA (1280x1024) 60Hz
HD720p (1280x720) 50,60 Hz
6 Video Outputs:
ƒ 2 S-Video outputs, Mini-DIN connectors.
ƒ 2 composite video outputs, RCA connectors.
ƒ 2 VGA/DVI-I (DVI = Digital Video Interface, I = Integrated Digital & Analog) output, analog
or digital.
The first Mini-DIN connector and the first RCA connector provide main video (incoming/outgoing
video and menus). The two other connectors provide selfview/snapshot/Duo Video. The S-Video
outputs are used by default by the monitors. The outputs are always active. The format of the
output will be either PAL or NTSC depending on your country’s standard video format.