beautypg.com

Swap floppy drive default value is disabled – Tyan Computer TYAN S1668 User Manual

Page 25

background image

25

S1668-ATX-001 http://www.tyan.com

Virus warning

This category flashes on screen. During and after the system boot up,
any attempt to write to the boot sector or the partition table of the hard
disk drive will halt the system and the following error message will
appear. In the meantime, you can run an anti-virus program to locate the
problem. Default value is Enabled.

Enabled Activate automatically when the system boots up causing a warning

message to appear when anything attemps to access the boot sector or
hard disk partition table.

Disabled No warning message to appear when anything attemps to access the boot

sector or hard disk partition table.

CPU Internal Cache/External Cache

These two categories speed up the memory access. However, it de-
pends on the CPU/Chipset design. Default value is Enabled.

Enabled

Enables the cache

Disabled

Disables

the

cache

Boot Sequence

This category determines which drive the computer searches first for the
disk operating system (i.e. DOS). Default value is A,C.

A,C

System will first search for floppy disk drive then hard disk drive.

C ,A

System will first search for hard disk drive then floppy disk drive

Swap Floppy Drive

Default value is Disabled

Enabled Floppy A & B will be swapped under DOS
Disable

Floppy A & B will be normal definition.