Timex T609 - Manual (Page 17)

16
Troubleshooting
PROBLEM
The alarm does not sound
The alarm sounds at an incorrect time
Buzzer alarm is heard when waking to CD
POSSIBLE CAUSE
• The alarm was not set correctly for AM/PM
• Alarm icons are not on the display
• The wrong alarm icon was on the display
• The alarm was not set correctly for AM/PM
• A CD was not inserted into the CD player
• The CD was inserted incorrectly into the
player
• Compartment CD player door is not closed
REMEDY
• Check the alarm time setting
• Press the Alarm Button until the Alarm
icon appears on the display
• Make sure the alarm you wish to wake to
is the only Alarm icon that appears on the
display
• When waking to CD, always make sure a
CD has been inserted
• Always insert the CD with the label surface
facing up
• Push down gently until the door is
completely closed
• Connect to an AC outlet
• Try the unit on another outlet
• Do not use an outlet that is controlled by
a wall switch
• Check the bottom of the disc and clean
if necessary with a soft cleaning cloth,
always wipe from the center out
• Clean with a commercial lens cleaner
If you have any questions, call SDI Technologies Inc. Timex Audio Products Division Customer Service, 1-800-888-4491
• The unit is disconnected from an AC outlet
• The AC outlet has no power
• The AC outlet is controlled by a wall switch
that is off
• Dirty or defective disc
• Dirty lens
There is no display and the CD/radio will
not play
CD skips while playing