Tyco Electronics ET2200L - Manual (Page 24)

Elo TouchSystems 2200L User Guide 24
APPENDIX
A
TOUCHMONITOR SAFETY
This manual contains information that is important for the proper setup
and maintenance of your touchmonitor. Before setting up and power-
ing on your touchmonitor, read through this manual, especially
Chapter 2 (Installation and Setup), and Chapter 3 (Operation).
1 To reduce the risk of electric shock, follow all safety notices and
never open the touchmonitor case.
2 Turn off the product before cleaning. (Please refer to Care and
Handling of Your Touchmonitor on the following page for proper
cleaning methods.)
3 Your touchmonitor is equipped with a 3-wire, grounding
power cord. The power cord plug only fi ts into a grounded
outlet. Do not attempt to fi t the plug into an outlet that has not
been confi gured for this purpose. Do not use a damaged power
cord. Only use the power cord that comes with your Elo
TouchSystems Touchmonitor. Use of an unauthorized power
cord may invalidate your warranty.
4 The slots located on the sides and top of the touchmonitor case
are for ventilation. Do not block or insert anything inside the
ventilation slots.
5 It is important that your touchmonitor remains dry. Do not pour
liquid into or onto your touchmonitor. If your touchmonitor
becomes wet do not attempt to repair it yourself.