Texas Instruments bq24013 - Manual (Page 9)

2-1 Test Summary
Test Summary
This chapter describes the test setups used and the tests performed in evalu-
ating the EVM.
Setup: The bq24013 EVM board requires a single-cell Li-Ion or Li-Pol battery
pack and a 5-VDC, 1-A power source to provide input power. The test setup
connections and jumper setting selections are configured for a stand-alone
evaluation but can be changed to interface with external hardware, such as a
microcontroller.
Topic Page
2.1 I/O and Jumper Connections 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Test Procedure 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2