Tripp Lite PDUMH20ATNET - Manual (Page 7)

7
6-1 Access PDU with Web Browser: After an
IP address has been assigned to the PDU, attempt
to access it with a Web browser that supports
frames, forms and Java
™ . Open a Web browser
on a computer connected to the LAN and enter
the IP address assigned to the PDU. You should
be prompted for a password
A . The user name is
admin and the default password is admin. After
you enter the user name and password, the
PowerAlert Status page
B will appear in the
browser window. For more information about
configuration and operation of the PDU via the
PowerAlert interface, refer to the
SNMPWEBCARD User's Guide, included on the
CD-ROM bundled with the PDU.
Note for Network Management System Users Only: Two MIB
files - Tripplite.mib and RFC1628.mib - must be loaded on each
Network Management Station that will monitor the PDU via
SNMP. The files are provided on the CD-ROM included in the
product package.
A
B
2.3 Networking the PDU (continued)
2.3.3 Testing Network Connection
2. Installation
(continued)
English.indd 7 1/16/2009 4:37:23 PM