More advanced operation english – Tascam CD-X1700 User Manual

Page 19

4. More advanced operation

English

TASCAM CD-X1700 DUAL CD PLAYER

Memory data

… l DISC ID

… CUE point

… CUE 1-3 points

… LOOP A/B points

… LOOP mode

… Play mode

… Tempo data

… Tempo Range

… Key Original On/Off

… TAP value

… Brake On/Off

… Brake Time

… Key value

… Time mode

… Sampling points

… Effect setting

… Sampling points for the MP3 file cannot

be memorized

Recall

1. Select the memory bank by pressing and holding

the SHIFT

key then pressing the

TEMPO/BANK key. If there is a track memory
data of selected track in the current selected
memory bank (A to E), the “M” indicator in the
LCD lights.

2. Enter the recall mode by pressing and holding

the SHIFT

key then pressing the

FLASH/RECALL key. If there is a track
memory data for the current selected track, its
memory number is shown in the LCD.

3. When track memory number is shown in the

LCD, pressing the ENTER key recalls the track
memory data.

The CD-X1700 can recall the track (song) from the
track memory data.

NOTE

1. Select the memory bank by pressing and holding

the SHIFT

key then pressing the

TEMPO/BANK key.

2. Enter the recall mode by pressing and holding

the SHIFT

key then pressing the

FLASH/RECALL key. Using the Jog wheel to
select the desired track memory number.

3. When track memory number is shown in the

LCD, pressing the ENTER key recalls the track
from the track memory number.

… Cue and loop points can be memorized

and/or recalled. However, just after the
recall operation, seamless start from the
cue or loop points can’t be performed
because there are no data in the RAM
buffer just after the recall operation.
Once playing from cue points (CUE 1-3)
and/or loop start point for a few second,
flash start and/or seamless looping can
be performed.

NOTE