Transcend Information StoreJet 35 Ultra - Manual (Page 21)

21
9. Click “Erase” again to confirm.
10. Click the “Close” button to finish and exit.
Linux
®
1. Plug the StoreJet 35 Ultra into an available USB port on your Linux computer.
2. Unplug all other USB storage devices from your computer. This is to prevent accidental format of a
different USB drive.
3. Type fdisk /dev/sda (replace /dev/sda with your actual USB device)
4. Press p
5. Press n
6. Press w
7. Type mkfs.ext3 /dev/sda1
8. Go to /etc/fstab and add: /dev/sda1 /mnt/usbdrive auto user,noauto 0 0
9. Type mkdir /mnt/usbdrive
10. Type mount /mnt/usbdrive