Transcend Information StoreJet 35 Ultra - Manual (Page 12)

12
Linux
®
1. Connect the power cable to the Power Adapter and plug it into your home’s power outlet. Then connect
the Power Adapter to the StoreJet 35 Ultra’s round-shaped DC power input jack.
2. Plug the square-shaped end of the USB cable into the StoreJet 35 Ultra.
3. Plug the other end of the USB cable into an available USB port on your desktop.
4. Turn on the StoreJet 35 Ultra’s power switch. Its LED will light up and the cooling fan will start.
5. If you installed a brand new hard drive or a hard drive that was previously used with a Windows ® or
Mac ® computer, please follow the instructions in the Formatting the Hard Drive section to prepare your
disk for use with your Linux ® system.
6. Create a directory for the StoreJet 35 Ultra.
Example: mkdir /mnt/Storejet
7. Then, mount the StoreJet 35 Ultra.
Example: mount –a –t msdos /dev/sda1 /mnt/Storejet