Toshiba SX-2801 - Manual (Page 19)

BASIC OPERATION
19
Basics
3 NUMBER REDIAL
You can redial any of the last three numbers dialed from the handset:
1
Press in standby mode. The last dialed number (Redial 1)
appears.
Each time you press
, the LCD displays one of the three last
dialed numbers (Redial 1 to Redial 3).
2
After the desired number has been selected, press . The call will be
connected.
NOTES:
• The handset redials only up to 32 digits even for a number that exceeds this limit.
• When you press
after pressing or , the latest dialed
number will be dialed automatically.
OUT OF RANGE
During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move close to the base unit. If you
travel out-of-range, your call terminates.(See page 20 “Interference or
static”).
HANDSET EARPIECE VOLUME SETTING
To adjust the earpiece volume, press ( or ) during a call.
HANDSET RINGER VOLUME SETTING
To adjust the ringer volume, press ( or ) during standby
mode.
RINGER OFF
You can turn off the handset ringer volume.
During standby mode or when you set the ringer volume, press and
hold (
) till “Ringer Off” appears.
To resume the Ringer, press ( or ). VOL/RING
VOL/RING
VOL/RING
VOL/RING
FLASH TALK REDIAL
TALK
REDIAL
REDIAL
Ringer Off
SX-2801.qxd 3/15/1 6:02 PM Page 19