Toshiba SX-2801 - Manual (Page 14)

14
INSTALLATION
Preparation
Before using the Handset, make sure to read the following instructions.
SETTING THE DIAL MODE
Depending on your dialing system, set the mode as follows:
1
Press and hold until you hear a confirmation tone.
2
To set the dial mode for
pulse dialing, press
. Or to set
the dial mode for tone
dialing press
.
A confirmation tone
sounds to indicate the
setting is complete.
TONE/
PULSE /
FLASH
Dial Mode:Pulse
Tone - Press
Pulse - Press # Dial Mode:Tone
Tone - Press
Pulse - Press #
Tone Dialing Pulse Dialing
PULSE / TONE/
FLASH
SELECT
FUNCTION
PULSE /
TONE/
SX-2801.qxd 3/19/1 9:26 AM Page 14