TRENDnet TEW-636APB - Manual (Page 4)

2. Hardware Installation
English
2
Note: Locate an optimum location for the Access Point. The best place for the
Access Point is usually at the center of your wireless network. Please connect
the computer configuring the TEW-636APB to the same switch/hub.
1. Connect a RJ-45 cable from the
Switch/Hub to the LAN port of the
Access Point.
3. Verify that the following panel lights
are on: Power and WLAN.
2. Connect the AC Power Adapter to
the Access Point and then to a
power outlet.