1 inserting batteries in the remote control, 2 powering on and checking picture, Inserting batteries in the remote control – Topfield TF 5510 PVR User Manual
Page 22: Powering on and checking picture
16
Setup
2.5.1
Inserting batteries in the remote control
To insert the batteries, open the battery compartment by remov-
ing the lid, and then insert the batteries observing the polarity,
which is marked on the base of the battery compartment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for the
damage resulting from leaking batteries.
NOTE
Batteries, including those which contain no heavy metals, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
2.5.2
Powering on and checking picture
Now, press the
button in top left corner on the remote
control.
If the picture is good, you can skip to §
to search for the
available television and radio services. Otherwise, you may
need to temporarily connect the composite video connector
(VIDEO) to your television set so that you can see the on-screen
menus in order to configure the video settings.