Tektronix 750 - Manual (Page 8)

User safety summary
Terms in manual:
Caution:
Conditions that can result in damage to the product.
Warning: Conditions that can result in personal injury or loss of life.
Use proper power source: Do not operate this product from a power source that applies
more than the voltage specified. To avoid fire hazard, use only the power cord specified
for this product. In hospital applications, grounding reliability can only be achieved by
the use of a hospital grade power cord, and the equipment is connected to an equivalent
receptacle marked “hospital only” or “hospital grade.”
Operation of product: There are no user-serviceable parts inside the product. Avoid
electric shock by contacting a qualified service technician to repair the product. Do not
operate without the covers and panels properly installed. Do not operate in an
atmosphere of explosive gases or flammable mixtures.
Safety instructions: Read all installation instructions carefully before you plug the
product into a power source.
Terms on product:
CAUTION: A personal injury hazard exists that may not be apparent. For example, a
panel may cover the hazardous area. Also applies to a hazard to property including the
product itself.
DANGER: A personal injury hazard exists in the area where you see the sign.
Care of product: Disconnect the power plug by pulling the plug, not the cord.
Disconnect the power plug if the power cord or plug is frayed or otherwise damaged, if
you spill anything into the case, if product is exposed to any excess moisture, if product
is dropped or damaged, if you suspect that the product needs servicing or repair, and
whenever you clean the product.
Ground the product: Plug the three-wire power cord (with grounding prong) into
grounded AC outlets only. For protection against electric shock, this product is
classified Class I, and Type B where applicable.
Location of product: Place the printer in a well ventilated area.