Tiger TWR-180 - Manual (Page 11)

-10- June 27, 2006
Ref. Part No. Description Qty.
1 271-005 Cotter pin, 3/16 x 1-1/2 3
2 256-001 Flat washer, 1 13
3 302-013 Clevis pin, 1 x 2-1/8 2
4 262-006 Roll pin, 3/8 x 2 3
5 C310-113 Hitch clevis 1
7 C310-118 Pivoting hitch assembly. 1
8 C310-119 Pivot hitch weld sleeve 1
9 250-060 Bolt, 1/2 x 1-3/4 UNC 3
10 256-011 Flat washer, 1/2 7
11 270-007 Lock nut, 1/2, UNC 3
12 273-006 Grease nipple, self tap 6
13 C310-117 Hitch frame assembly 1
14 C310-142 Retaining pin, 1 x 3-15/16 U.L. 2
16 C310-131 Lift rod, 101" O.A. 2
17 302-015 Clevis pin, 1 x 2-7/8 1
18 229-007 Compression spring, 1/2” 2
19 250-111 Bolt, 3/4 x 4 UNC 1
20 C310-125 Suspension top plate 1
21 270-001 Lock nut, 3/4 UNC 5
22 CS01-130 Leveling rod lug 2
23 257-008 Nut, 1 UNC 2
24 257-006 Half nut, 1 UNC 2
25 302-012 Clevis pin, 1 x 1-15/16 2
28 C310-108 Center section wheel standard 1
29 250-112 Bolt, 3/4 x 3 UNC 4
30 CS01-134 Retaining pin, 1 x 4-5/8 U.L. 1
31 C502-183 PTO storage support 1
32 302-034 Bent hitch pin 1
33 271-053 #10 hitch pin clip 1
HITCH FRAME AND CENTER WHEEL STANDARD