Yamaha PSR-330 - Manual (Page 18)

16
,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,
QQQQQQQQQQQQQQQQ
QQQQQQQQQQQQQQQQ
Playing the PSR-330
One- or two-digit voice numbers can be entered without leading zeros. To select
voice number “23” (JAZZ ORGAN 2), for example, simply press the [2] button and
then the [3] button. The bars below the voice number on the display will flash for
a few seconds, and then disappear when the selected voice number has been
recognized by the PSR-330.
One- or two-digit voice numbers can also be entered with leading zeroes: e.g. “23”
can be entered as “023” by pressing the [0], [2], and [3] buttons. In this case the
specified voice number will be immediately recognized by the PSR-330.
1 2 3
4 5 6
7 8
0
9
NO YES
023 JazzOrg2
VOICE R1
23
● The [VOICE] Button
Pressing the [VOICE] button increments the voice number. Press briefly to
increment by one, or hold for continuous incrementing.
VOICE
3
Play & Adjust Volume
You can now play the selected voice on the PSR-330 keyboard. Use the [MASTER
VOLUME] control to adjust the overall volume level.
If the Voice Set function (page 65) is turned “on”, whenever a panel voice is selected
appropriate “R2” and “L” voices (i.e. DUAL VOICE and SPLIT VOICE modes) as
well as digital effects, etc., will be automatically selected at the same time.
MIN MAX
MASTER
VOLUME
• The PSR-330’s GM
voices are selected in
the same way as the
panel voices, as de-
scribed above.
• When a GM voice is
selected the GM icon
will appear below the
voice number.
• Refer to page 74 for a
complete list of the
panel and GM voices.