Yamaha PSR-320 - Manual (Page 41)

40 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Recording
Play from a Specified Measure
You can start SONG playback from any specified measure, as long as the
specified measure is within the range of measures that has already been re-
corded:
2
Enter the Desired Measure Number
......................................................................
Use the [–/NO] and [+/YES] buttons or the number buttons to enter the
desired measure number.
1
Select the MEASURE Parameter
..................................................................................
Use the CURSOR buttons to select the MEASURE parameter in the
display.
CURSOR
MEASURE
01
–/NO + / YES
6 5 4
0
7 8 9
1 2 3
1– –
* *
3
Start Playback
..................................................................................................................................................
You can now start playback from the specified measure number.
• Three-digit numbers are entered
by first pressing and holding the
[1] or [2] button until “1” or “2”
appears in the hundreds position
on the display, then press the
remaining two digits in sequence.