Yamaha PSR-320 - Manual (Page 30)

29 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Using Auto Accompaniment
■ Muting Individual Tracks
..............................................................................................................
Individual accompaniment tracks can be turned OFF (muted) or ON by
using the cursor buttons to select the icon of the target track (the icon and
track name will flash), and then using the [–/NO] and [+/YES] buttons to
turn the track OFF or ON, respectively. The track icon will disappear when
a track is muted.
■ Changing Accompaniment Track Voices
......................................................
You can change the voice played by any individual accompaniment track
by using the cursor buttons to select the voice number of the target track (the
voice number will flash), and then using the number buttons or [–/NO] and
[+/YES] buttons to select the desired voice number. Please note that only
numbers 1 through 8 can be selected for the RHYTHM track, and that these
numbers correspond to PERCUSSION KIT numbers 129 through 136.
Voice numbers 01 through 136 can be selected for all other tracks.
PAD
19
ON /
OFF
VOICE
VOL
–/NO + / YES 0
7 8 9
PAD
18
PAD
18
ON /
OFF
VOICE
VOL
–/NO + / YES 0
7 8 9
■ Adjusting Accompaniment Track Volume
...................................................
The volume of each accompaniment track can be adjusted to produce the
ideal “mix” between tracks. Use the cursor buttons to select the volume bar
of the target track (the volume bar will flash), and then use the [–/NO] and
[+/YES] buttons to set the maximum volume of the track as required. The
shorter the bar, the lower the volume. During playback the top segment of
each volume bar will remain at the maximum volume level, while the lower
bars will move according to the amount of activity in each track.
• When a different style number is
selected, all accompaniment
track parameters will be reset to
their initial values. Use the REG-
ISTRATION MEMORY — page
33 — if you want to store a par-
ticular set of settings for instant
recall when needed.
• After changing the voice or vol-
ume, the [–/NO] and [+/YES]
buttons can be pressed simulta-
neously to reset the initial values.
• The track data changed applies
to all sections.
• See page 46 for information on
accompaniment track control with
cartridge styles.
PAD
19
ON /
OFF
VOICE
VOL
–/NO + / YES 0
7 8 9
ON OFF
Voice Number
Volume
• PHRASE 1, 2 tracks can also be
selected by moving the cursor. If
the PHRASE 1 track is selected
and the cursor is moved once to
the right, the cursor will not actu-
ally move but “PHRASE 2” will
appear in place of “PHRASE 1”
and the parameters for the
PHRASE 2 track can be changed
as required.
• Muting individual tracks, chang-
ing accompaniment track voices
and adjusting accompaniment
track volume cannot be executed
during song recording.