6 change operating mode, 1 change from otp mode, 2 change to otp mode – Tyco Electronics M/A-COM MM23016 User Manual

Page 17: 6change operating mode

MM23016, Rev. C

CHANGE OPERATING MODE

6.1 CHANGE FROM OTP MODE

To change from OTP operating mode to P25, EDACS, or Conventional:

1. Use

to cycle through the menu until the “Mode Menu” appears in the bottom line of the

display.

2. Use

to choose an available mode. Press MENU and confirm (Y/N) with

and press

MENU again.

3. Press the MENU button to confirm.

6.2 CHANGE TO OTP MODE

1. Use

to scroll through available systems until OpenSky is displayed.

2. The radio transitions to OTP mode.