T-Fal BeerTender User Manual
Page 9
10
ENGLISH
* After setting up the BeerTender® and before use, it is
vital to clean the detachable pour spout – this is the
only part of the appliance that will come into contact
with the beer. The spout should be rinsed by hand.
After cleaning, screw back into place.
*
Before inserting the DraughtKeg
TM
into the
BeerTender, simply snap the patented disposable
draught beer tube (5 tubes included) onto the
DraughtKeg.
*
Open the BeerTender cover by pressing in the release
panel on the top of the machine.
*
Place DraughtKeg into BeerTender.
*
Remove the tap spout cover by lifting it up.
*
Position the draught beer tube as shown in drawing.
*
Put the tap spout cover back into place.
*
Carefully close the lid.
*
Set the drip tray and grate in place at the front of the
appliance. Make sure the drip tray is properly fitted
and positioned.
B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 10