T-Fal BeerTender User Manual
Page 7
8
ENGLISH
Fire prevention
In the event of a fire, use carbon dioxide (CO2)
extinguishers.
Do not use water or powder extinguishers.
Setup and Maintenance
* Install the BeerTender® in an upright position in a safe
place.
* To ensure that the BeerTender works correctly and
efficiently, the following is strongly advised:
* Place it on a perfectly level and stable surface.
* Choose a clean, well-lit area with an easily accessible
electric socket.
* Keep the appliance at a minimum distance (4 inches)
from the stove as shown in the diagram.
* Keep the appliance at a minimum distance
(2
½
inches) from the walls.
* Store the DraughtKeg
TM
at room temperature or in the
refrigerator.
* Make sure the BeerTender is not exposed to direct
sunlight.
* Do not use the BeerTender outdoors.
* Do not place the BeerTender on very hot surfaces or
near open flames, as these may melt or damage the
casing.
* Your BeerTender uses a technology that delivers
ultimate cooling results when the ambient temperature
is between 54°F and 86°F. At colder temperatures, the
appliance cooling system could be damaged. At warmer
temperatures, the cooling system will not be able to
reach the pre-programmed temperature.
Warning! To avoid overheating, always keep the
BeerTender appliance out of direct sunlight. To obtain
good cooling performance, never install your machine in
a room with an ambient temperature above 86°F.
5
Using the BeerTender System
* Always hold the appliance by the bottom edge when
lifting.
* To obtain draught beer of optimal quality you should
keep two basic factors in mind, the temperature of the
beer and hygienic conditions. Follow these few simple
steps for the ideal use of BeerTender.
B80 one way T-FAL US modif heineken .qxd:B80 one way SEB Uklta.qxd 25/06/08 15:10 Page 8