Topcom Skyr@cer WBR 7121 - Manual (Page 27)

Eng
lish
21
Setup the print server
J Select Print Server in the General Setup menu.
You enter the Print server screen.
- Print Server setup screen -
o
Print Server:
1
Enable Print Server: Enable/Disable the print server function. This function
should be enabled if a printer is connected.
2 IPP: Enable/Disable Internet Printing Protocol. Should be enabled to activate
this protocol.
3 LPR: Enable/Disable Line Printer Remote protocol. Should be enabled for LPR
printing.
4
Print Name of USB Port 1/2: Enter a queue name for a printer connected to
USB port 1 or 2. (for example printer for USB port 2 : printerX)
5
Enable Internet Printing: Enable/Disable printing over the Internet. Should be
enabled for using the printer over the Internet.
JClick Apply
Make sure that the queue name enterd for the USB port will be exactly the same as
in the printer setup of the computer (See next chapter)