Topcom Skyr@cer WBR 7121 - Manual (Page 10)

4
Setup the Broadband Router
o Cable modem: Used for cable modem connections.
- IP Address info for Cable Modem -
1 Host Name: Enter your Host Name if necessary.
2
MAC Address: Some Cable Internet Providers will keep the MAC address of
your computer in their server. In this case you should clone the Mac address of
your computer.
JClick Clone Mac Address to copy your computers Mac address into the
router.
JClick OK to proceed. (Go to “ Finishing the Broadband Connection Type Setup Wizard”
on page 8)
o
Fixed-IP xDSL: Used for cable modem or DSL bridge with fixed IP address.
- IP Address info for Fixed-IP xDSL -
1
IP address assigned by your Service Provider: Please enter the fixed WAN
IP address.
2
Subnet Mask: Enter the Subnet Mask.
3 DNS Address : Enter the DNS address.
4 Service Provider Gateway Address: Enter the Gateway IP address.
JClick OK to proceed. (Go to “ Finishing the Broadband Connection Type Setup Wizard”
on page 8)