Triax STR 333 - Manual (Page 6)

1. ANTENNA
Input connector from terrestrial antenna.
2. RF LOOP OUT
Looped through antenna RF signal output.
Used to connect to ANT IN.
3. LNB
Input connector from LNB.
4. LOOP THROUGH
Output for SAT IF looped through signal.
5. RS-232
To connect to a personal computer for software
upgrade.
6. ANT IN
RF antenna input.
7. TV OUT
To connect a TV via a coaxial cable.
8. S/PDIF(Coaxial/Optical)
To connect a digital amplifier output.
9. VIDEO
Video connection port to the TV or
other equipment.
10. AUDIO
Audio connection port to the TV or
other equipment.
11. USB port
To connect the USB cable to the PC.
12. SCART for VCR
Connect this port to the VCR via SCART cable.
13. SCART for TV
Connect this port to the TV via SCART cable.
14. S-VHS
Video connection port to a TV or other equipment via
super video.
15. POWER Switch
Provide power to the main unit.
16. POWER Supply
90 ~ 250V AC, 50/60Hz.
1.3 Rear Panel
1 3 6 8 9 12 15
13 10
16 14 11
7
5
4 2
Note
The design of the Front/Rear Panel may be changed without
any notice in advance.
6
1. STAND BY(POWER)
Switch the receiver power "ON" or "OFF".
2. MENU
To see main menu.
3. VOL -/+
To turn the volume -/+ or select a
sub-menu item.
4. OK
To select a program, a highlighted line or
parameter value.
5. CH -/ + ( Program Ÿ / ź )
Channel -/+ or select item of sub-menu.
6. EXIT
Exit from parameter and cancel selected function.
7. Smartcard Slot
1 Slot for smart card.
8. Cam Slot (Option)
2 Slot for Common Interface CAM with smart card.
8 1 7 2 3 3 5 5 4 6
1.2 Front Panel