Trust Computer Products 1290Z - Manual (Page 18)

TRUST 1290Z POWERC@M OPTICAL ZOOM
Setting Options Explanation
[Quantity] Date Print, prints the date on the print. The
number can be set between 0 and 99
[Slide Show] Start slide show. Press the “ENTER” button to
start/stop the slide show.
Table 8: settings in the Playback mode
11.3 Settings in the SETUP mode
Switch on the camera, and turn the selector dial to “Setup” (Figure 3)
Use the “Ç” and “È” buttons to select the function
Use the “Å” and “Æ” buttons to adjust the setting
Option Function, and possible settings
[Date Setting] Set the date (Figure 4)
[Card Formatting] Format the memory card
[Language] Set the language
[LCD Brightness] Adjust the luminance of the LCD display. Ideal in sunlight,
or in darker surroundings.
[Beep] Set the aural signal
[Auto Shut off] Adjust the energy-saving setting (1, 3, or 5 minutes)
[Video out] Set Video-out to PAL or NTSC. On the adjustment of the
setting the LCD display will be extinguished for a maximum
of 5 seconds.
Table 9: settings in the setup mode
11.4 Fitting the wrist strap
Fit the wrist strap to the camera for optimum convenience, and for the safety of your
camera. Attach the strap to the attachment point (19, Figure 1d)
12 Software
12.1 Trust Photo Site
Trust offers you an opportunity to publish your photographs on the Internet. To do so,
surf to our website (www.trustphotosite.com). A number of conditions are attached to
the use of this site. The conditions are stated on our website,
www.trustphotosite.com.
Installation (Windows)
Install the Trust Photo Upload from CD-ROM. (Trust Installer Æ Install software
ÆTrust Photo Upload)
Use (Windows)
An instruction manual for the Trust PhotoSite is included on the CD-ROM. This
explains how to install and use the software. (Trust Installer Æ Read instructions Æ
Trust PhotoSite)
14