beautypg.com

Emptying the waste tray, Emptying the waste tray 38 – Tektronix 850 User Manual

Page 49

background image

38

Phaser 850 Color Printer

Emptying the waste tray

When the front panel displays Empty Waste Tray, follow this
procedure.

See page 1 for supplies ordering information.

Caution

The printer’s interior may be hot. Do not reach into the
printer while the maintenance drawer is removed.

1.

Open the front cover.

2.

Grasp the maintenance drawer, labeled as A, and pull it out of the
printer.

Note

The maintenance drawer may be locked while the ink
cools after the front panel troubleshooting routine,
Eliminate Light Stripes. Make sure all covers are
closed. Wait 15 minutes before trying to remove the
maintenance drawer. The maintenance drawer may
also be locked during the warm up cycle whenever the
printer is turned on.

Waste Tray