TRENDnet TEW-430APB - Manual (Page 4)

3. Verify that the following front panel
lights are on:
WLAN and LAN.
2. Hardware Installation
English
2
2. Connect the Power Adapter to the
Access Point and then to a power
outlet.
Note: Locate an optimum location for the Access Point. The best place for the
Access Point is usually at the center of your wireless network. Please connect
the computer configuring the TEW-430APB to the same switch/hub.
1. Connect a RJ-45 cable from the
Switch/Hub to the
LAN port of the
Access Point and then connect the
2dBi Detachable Antenna.