TRENDnet TEW-630APB - Manual (Page 5)

English
3
3. Configure the Access Point
Note: It is recommended that you configure the Access Point from a wired
computer. Before the Access Point can be configured, a Static IP address
must be assigned to your computer's network adapter in the subnet of
192.168.1.x. Since the Access Point's default IP address is 192.168.1.100,
make sure no other network devices are assigned an IP address of
192.168.1.1. (Refer to the Troubleshooting section on how to configure TCP/IP
settings on your PC)
2. Enter User name and Password,
and then click
Log in.
User name:
admin
By default, there is no password.
1. Open your web browser, type
http://192.168.1.100 in the
Address bar, and press
Enter.
3. Click Launch Wireless Setup
Wizard.
4. Click Next.