Thermador T36IB70NSP - Manual (Page 27)

27
q Transfer the middle drill holes along the outer edge
of the appliance door to the furniture front and mark.
q Remove the furniture door.
q Using the positioning aid, set both longitudinal sides
of the furniture door parallel.
q Using a square, extend the drill hole marks which
you have just made to the vertical marks.
q Mark and drill the holes.
q Screw on the fixing plates (10x).
22. Attaching the adjusting rail
(freezer compartment)
q Measure the distance Y between the adjusting rail
and the upper door.
q Loosen the 2 nuts and remove the adjusting rail.
q Mark this amount Y on the rear of the furniture door.
q Determine and mark the centre of the furniture door.