Thermador T36IB70NSP - Manual (Page 22)

22
q Attach the cover strip to the attachment plate (top).
Shorten the fitting strip to the required height!
14. Attaching the individual
appliance to the side of
the cavity
q Screw the attachment plate lugs (side) to the
adjacent furniture/fixtures (individual appliances
only).
15. Connecting the water to the
appliance
i When connecting the water pipe to the solenoid
valve of the appliance, follow the instructions
supplied by the manufacturer of the ice maker
installation kit enclosed with the installation manual.
d CAUTION d
When bending the water pipe, do not kink it,
otherwise there is a risk of leaks and water damage.
Use bending aids.
q Remove the cap from the appliance connection 1.
q Bend the water pipe according to the location of the
connection on the appliance 2.
q Push the union nut and seal onto the water pipe.
q Push the end of the water pipe into the appliance
connection and screw on the union nut 3.
Tighten handĆtight.
q Using the openĆended wrench, tighten the union
nut. Do not overturn!
q Open the shutĆoff valve and main water tap.
Check the connection on the shutĆoff valve and
on the appliance for leaks.