Teac SZ-1 - Manual (Page 13)

13
Repeat mode
< Halting playback stops the repeat mode.
Track repeat
When this is selected, the currently-selected track repeats. If
another track is selected during repeat playback, the newly-
selected track repeats.
Disc repeat
The whole contents of the disc are repeated.
Use the REPEAT button to select the repeat mode for
playback. Repeated presses of the REPEAT button cycle
between the following options:
REPEAT TRK
(track repeat)
REPEAT DSC
(whole disc repeat)
REPEAT OFF
(no repeat)
Display dimming
The display on the main unit can be dimmed to suit the
environment in which you listen to music. There are three
levels and an “off” setting.
Use the FL DIMMER button to cycle between these
settings.
< Note that the OFF setting is not memorized when the power
is turned off. When the unit is switched off with the display
off, and then turned on again, the display is reset to the
minimum brightness.
< In OFF mode, when you press a button such as PLAY, the
illuminations turn temporarily on.
Changing the display mode
During playback, it is possible to change the display as shown
here.
Currently playing track Elapsed time of
current track
Time remaining for current track
Time remaining for the disc
Total elapsed time of the disc