Teac SZ-1 - Manual (Page 11)

11
Playback
Opening and closing the tray
Pausing playback
Press the PAUSE button to pause playback.
Press PLAY or PAUSE to restart playback.
Stopping playback
Press the STOP button to stop playback.
Pressing OPEN/CLOSE opens the tray if it is closed, and closes
it if it is open. When the tray is opened during playback, it
may take a few seconds before the disc is “unloaded” and
the tray opens.
< When playback is stopped, pressing the L/H button of the
main unit opens and closes the disc tray.
Press the OPEN/CLOSE button (L) to open the tray. 2
Insert the disc label side up.
< In the case of double-sided discs, the side to be played should
be face down.
< Make sure the disc is centered in the tray in order to avoid
any malfunction or jamming of the tray or damage to the
disc.
Press the OPEN/CLOSE button (L) again to close the
tray. 4
3
The tray will close. Take care that you don’t catch your fingers
in the tray.
The unit reads the disc (this may take a little time).
Press the PLAY button to start playback. 5
2 5
4
3 1
Total number of tracks Total play time
standby indicator
Press the STANDBY button to turn the unit on.
The indicator is red in the standby mode. It turns blue when
the unit is turned on.
1