Topcom Balance - Manual (Page 6)

6
Getting started
2.2 Installing the base
- 2A Back view of base -
A. Telephone wall outlet
B. Power cable
C. Telephone cord
2.3 Installing the handset
- 2B Back view of handset -
A. Cover
B. Rechargeable batteries
1 Plug one end of the adaptor into the outlet and the other end into the adaptor
jack on the bottom of the base.
2 Connect one end of the telephone cord with the wall phone jack and the
other end to the bottom of the base.
3 Put the telephone- and AC power line cord in the base guides as shown on
picture 2A.
1 Open the battery compartment as shown on picture 2B.
2 Insert the batteries respecting the polarity (+ and -).
3 Close the battery compartment.
4 Leave the handset on the base unit for 20 hours.
Before you use the telephone for the first time, you must first make sure the battery
is charged for 20 hours. If you do not do this, the telephone will not work optimally.
A
B
C
+
-
-
+
A
B