The Eltron Company LP2122 - Manual (Page 27)

Replacing the
Printer Memory
Backup Battery
(LP+ Only)
The Memory Cartridge provides storage of op-
erating parameters, forms, graphics and soft
fonts. A battery in the cartridge prevents mem-
ory loss if the printer power is switched off or
disconnected. When the battery is exhausted,
the printer will print “BATTERY LOW”. If this
happens, follow the steps below to replace the
battery.
Battery
Replacement
Step ➊
Turn the printer on with the Memory Cartridge
installed, for a minimum of 5 minutes. This is
to prevent data loss while replacing the battery.
Memory loss will occur if this process is not
completed in approximately 5 minutes.
The discharge of electrostatic energy that accu-
mulates on the surface of the human body or
other surfaces can damage or destroy elec-
tronic components used in this device.
Step ➋ Turn off the printer and remove the memory
cartridge.
Operation
980008-001 Rev. B
21