Toshiba IK-WR01A - Manual (Page 11)

11
Precautions for Use
About the AC Adapter
● An AC adapter is not supplied with this model. If you
want to use an AC adapter, you will need to provide an
AC adapter capable of supplying at least 10 W.
About the Power supply
● The IK-WR01A operates with one of the following power
source: 12vDC, 24vAC or PoE. Set the power selection
switch on the camera to the correct power source
before turning the camera on. DO NOT RE-SET THE
POWER SELECTION SWITCH WHEN THE UNIT IS ON.
About the PoE Power Supply Device
● A PoE power supply device is required for supplying
power to the camera via the LAN cable.
● Use IEEE802.3af-compliant PoE devices.
● Use a 4 pair twisted cable for the LAN cable to
connected the camera to a PoE compatible hub.
About the software
This product contains a piece of software (hereafter the
Software) licensed to TOSHIBA CORPORATION
(hereafter TOSHIBA) by TOPCO CORPORATION.
(hereafter TOPCO).
The copyright and other intellectual property rights of the
software are held by TOPCO or the licensor.
The software is protected by the Copyright Law, Universal
Copyright Convention, and other intellectual property laws
and agreements. The permission of TOPCO or the licensor
must therefore be obtained before the software can be
reproduced.
Note, however, that the software is partly covered under
the GNU General Public License Version 2 (hereafter
GPL2). You can obtain a copy of GPL2 at http://www.fsf.org/
copyleft/gpl.html. TOPCO will provide the GPL-covered
source code of the software in accordance with the terms
of GPL2. Contact TOPCO if you need it for more information.