Toshiba IK-WR01A - Manual (Page 10)

10
NOTES ON USE AND INSTALLATION
• Do not aim the camera at the sun
Do not aim the camera at the sun or point it at sun even if
you are not shooting.
• Do not shoot intense light
Intense light such as a spotlight may cause a bloom or
smear. A vertical stripe may appear on the screen.
However, this not a malfunction.
• Treat the camera with care
Do not drop the camera or subject it to strong shock or
vibration. Otherwise, the camera may malfunction.
• Never touch internal parts
Do not touch the internal parts of the camera other than
the parts specified. Otherwise, the camera may
malfunction.
• Install the camera
Where no video noise appears
If cables are wired near electric lighting wires or a TV set,
noise may appear in images. In this event, relocate cables
or reinstall equipment.
• Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter
or colder than specified. Otherwise, the quality of images
may deteriorate or internal parts may be affected. Special
care is required to use the camera at high temperature
and humidity.
• Should you notice any trouble
If any trouble occurs while you are using the camera, turn
off the power and contact your dealer. Continued use in
this state might cause fire or electric shock. For details on
repair, consult the place of purchase, or please contact
the technical support number.