Toshiba 36AX61 - Manual (Page 37)

37
Ref
er
ence
W
elcome to Toshiba
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
Changing the location of the PIP window
With the TV in PIP mode, press LOCATE to change the location of
the PIP window on-screen. Every time you press LOCATE, the PIP
window changes position counter-clockwise.
Freezing the PIP display
With the TV in PIP mode, press STILL to freeze the PIP display. The
PIP picture becomes still and is outlined in red on-screen. Press
STILL
again to restore the moving picture (outlined in green).
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. The multi-window PIP displays only the channels you
programmed into the TV’s memory (see “Adding channels to the TV’s
memory” on page 24).
Note: The LOCATE, SWAP, PIP CHANNEL
yz , SOURCE,
and STILL buttons do not function in multi-window PIP mode.
To view multi-window PIP:
Press INFO.
The TV cycles through all of the programmed channels, showing a
few seconds of each channel’s programming, and then freezes the
image and moves on to the next channel in a continuous cycle. The
channel number appears above each small PIP window.
A
14 23 27 30 43 56
To turn multi-window PIP off:
Press INFO again or change the channel.
Note:
Multi-window PIP displays channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable). See
“Adding channels to the TV’s memory” on
page 24.
If V-Chip blocking is enabled when you view
multi-window PIP, the channels exceeding the
rating limits will appear as a black window
with a red “X.”
PIP Channel y / z
SWAP
LOCATE
SOURCE
STILL
PIP
CHANNEL y / z
AM/FM
DISC
INFO