TOA Electronics 595U - Manual (Page 15)

Installing th
e
Sof
tw
a
re
(W
indow
s)
5
8. Adjust the USB connector to the desired angle.
The USB connector is adjustable to three positions (approximately 90,
135, and 160 degrees). Do not force the hinge past the last position—
this may break the connector.
9. Gripping both sides of the USB modem, insert it into your computer’s
USB slot.
Alternatively, you can attach the USB extension cable to your
computer’s USB slot, and then connect the USB modem to the USB
extension cable.
When the USB modem is properly inserted, the PWR LED is lit, and the
USB modem’s battery starts to charge.
Windows detects the USB modem and installs the drivers for it. This
may take a few minutes. Once completed, Sprint Connection Manager
should display “Disconnected” (if your USB modem is preactivated) or
the “One Touch Activation” window, or automatically start the
Activation Wizard.
10. Allow the battery to charge for approximately two hours before closing
the window or making a selection in it.
WARNING: When inserting or removing your USB modem, always grip it by its
sides, as this prevents damage to the USB modem.
Note: If your computer’s USB slot is vertical, use the USB extension cable. Do
not insert the USB modem or the USB extension cable into a USB hub
or a USB slot on a keyboard.