Telstrat WCMICS VSX Series - Manual (Page 12)

12
To select a near-site or far-site camera or other video source:
1. If you are in a call, press Near or Far to select either a near-
site or far-site camera or other video source. The icon on the screen
indicates which you can select:
If you see this, you can
control a near-site camera
or video source
If you see this, you can
control a far-site camera or
video source
2. Press Camera on the remote control. Then press the number for the
camera or other video source you want to select at the near or far site.
For example, press 1 to select the main camera.
The image from the camera or video source you selected appears on the
screen.
To adjust a camera using the remote control:
1. Press Near or Far to select either a near-site or far-site
camera.
2. Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
3. Press Zoom to zoom out or in.