Telstrat WCMICS VSX Series - Manual (Page 10)

10
C ALLING AND A NSWERING
Placing Audio-only Calls and Adding Audio-Only Sites
You may be able to use your VSX system to place an audio-only call, or you
can add an audio-only call to a video conference. This lets you:
o
Use your system in the same way as a telephone.
o
Add audio-only participants to your video calls.
o
Add video calls to your audio-only calls.
Other audio options are available if your conference room has a VSX video conferencing
system integrated with a SoundStation VTX 1000™ conference phone.
For more information about using the SoundStation VTX 1000 conference phone, see
Using the SoundStation VTX 1000 Conference Phone in Video Calls on page 28.
Placing an Audio-Only Call
You can place an audio-only call from VSX systems that have Analogue Phone or
Voice Over ISDN enabled.
To place an audio-only call from your system:
1. On the Place a Call screen, enter the number you want to call.
o
To place a call within your PBX system, enter the last four digits of
the number.
o
To delete a digit, press Delete on the remote control.
2. Press Call to place the call.
Adding an Audio-Only Call to a Video Call
To add an audio-only call after your video call connects:
1. Press Call on the remote control.
2. Select Add Call from the Hang Up screen.
3. Use the number buttons on the remote control to enter the telephone
number of the audio participant that you want to add to your video
conference.
4. Press Call on the remote control.
5. After the audio call connects, press Near or Far to return to
the video conference.