Tekkeon ET7000 - Manual (Page 15)

Call Waiting
To Answer a Call Waiting Call (if supported by your mobile phone)
1. When you hear two beeps while connected on a call, press the ADD CALLER
button. The original call will be placed on hold and the new call be will be
connected. Your phone will display the incoming and connected calls.
2. While connected on a call, press the ADD CALLER button to toggle between the
two connected calls.
3. Press the POWER button to end a connected call. You will be reconnected to the
other call.
Conference
To Initiate a Conference Call (if supported by your mobile phone)
1. With two calls connected, press and hold the ADD CALLER button for six
seconds. Both calls will be connected on a conference call. Your phone will
display the incoming and connected calls.
2. To end the conference, press the POWER button. Both connected calls will be
disconnected.
NOTE: For some mobile phones, you must configure the phone to answer calls
directly on your Bluetooth headset. Refer to the mobile phone user guide for
instructions for initiating this feature.
USER GUIDE 13
et7000_ug_fnl_R 1/24/06 2:48 PM Page 13