Tekkeon ET7000 - Manual (Page 10)

Using myTalker
Powering myTalker
To Turn On myTalker
1. Press and hold the POWER button until the blue LED flashes or until you hear
the On tone (approximately four seconds). myTalker turns on and is placed in
standby mode, ready to make and receive calls. The blue LED will flash at
two-second intervals.
To Turn Off myTalker
1. Press and hold the POWER button until the blue LED flashes four times quickly
or until you hear the Off tone (approximately four seconds).
Making Calls
You can make calls from your mobile phone, or directly from myTalker using the
last number redial feature or voice dialing commands (if these features are
supported by your mobile phone).
To Make Calls from Your Mobile Phone
1. Dial the number from your mobile phone. The call is automatically connected to
myTalker.
8
et7000_ug_fnl_R 1/24/06 2:48 PM Page 8